Walkie Talkie cradle/base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cradle I made for/with my son.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 36
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I got my son a pair of walkie talkies last week. He wanted a cradle so they don't wander everywhere.
We sat down and browsed for inspiration. He found nothing that met his taste.
He was clear the devices should be enclosed to a certain height and I've measured them so the slot they slide into is a perfect match. Also the spacing between the 2 devices had to be exactly as commanded.
Lastly, he didn't want them standing up straight, but they must have a 30 degree angle. So I modelled a triangle shape and a support to prevent it from falling over.
Total time modelling: 30 minutes!
Prints as one piece without supports.
The Walkie Talkies are the cheap ones from a Dutch discounter.