A super simple magnetic white board marker holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a marker holder in my home office and designed and printed this while on conference calls.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 42
- Makes
- 0
- Views
- 230
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It's not much to look at, but it works perfectly. I had a need, I solved that need.
It takes 8x3mm neodymium magnets in the back to stick to magnetized whiteboards. I made the slots for the markers a little wide so they can accommodate multiple sizes if need be.
For my print, I took the default “0.20mm SPEED” print settings in PrusaSlicer and just bumped up the layer height to 0.3mm. I printed it using 10% gyroid infill, and it is plenty rigid and strong enough to hold the lightweight markers.
The line you see in the middle of the print in the photo is because I had the holder upright on the build plate, and I ran out of filament mid-print. I have no idea why it looks so different, given it's the same filament from the same company. It's a marker holder in my office, so I didn't care enough to reprint it.