Scoop for plastic and glass bottles [Vase Mode]
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An assortment of scoops, that fit directly in standard plastic and glass bottles, designed for vase mode.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 36
- Makes
- 0
- Views
- 456
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
These are some basic scoops that fit in your standard plastic or glass bottles, to fill them with protein powder, sugar or other supplements. Designed for an easy Vase Mode print.
The plastic bottle scoops come in 5, 10, 15 and 20 ml variants with a 20mm diameter.
The glass bottle scoops come in 5 and 10 ml variants with a 16mm diameter.
All scoops have their size imprinted. I use the 15ml variant and measured 5g of protein powder for one loosely filled scoop. You can look up the densities for different stuff, eg. with fine sugar, 1ml = 1g approximately.
I printed this in .2mm layer Vase Mode, PETG, with extrusion width set to .65 on a .4 nozzle, though I suggest a smaller layer heigth for a smoother surface. Any standard settings should be fine on a .4 nozzle. The handle bars are so close, they should fuse together, which worked fine in my case.