1 / 1
EKKO Remote Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple model to organize the 3 remotes included with the Winnebago EKKO.
TV, DVD player and Sound bar.
Can be attached via 3M VHB (double sided tape) or if your concerned about it falling off 2x #8 ~1" long wood screws can also be used.
Printing instructions;
- No Supports required
- Any plastic should be fine. printed mine in ABS
- Layer Height: 0.2-0.3mm
- Outer walls: 3 x .4mm (1.2mm)
- Infill: 20%
- See photo below for print orientation
