1 / 4
Logitech C920 Webcam Privacy Cover and Shim in One — image 1
1 / 4

Logitech C920 Webcam Privacy Cover and Shim in One

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Cover and Shim combined into one design that is secured to the camera.

Rating
0 / 5
Likes
7
Downloads
45
Makes
0
Views
451
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Post a make if you print! I would love to see it.

  • Flip up cover for privacy when you're not using your camera

  • Shim underneath raises the clip slightly higher so the front part of it doesn't obstruct any part of your screen

  • All in one design

  • Microphones are unobstructed so they can still be used while the cover is down 

  • You can still see the lights on the side that show the camera is active while the cover is down

  • Not a janky solution that's just sitting under it or loosely on top of it - instead it is secured rock-solid with a clamp design that uses M3 screws and nuts  

  • Can be removed easily with no damage to the webcam, just undo the M3 screws

  • Cover doesn't actually touch the lens, it hovers very close to it, so no risk of scratching

Hardware Required
  • (x3) M3 x 20mm round socket head screws

  • (x2) M3 square nuts

  • (x1) M3 nylon locknut

Hardware Links
Printing
  • Press ‘split to objects’ in the slicer

  • Print with custom supports as per the last image - organic on build plate only with blocker and enforcer painting to achieve supports shown in image. 

Assembly
  • Use 2 x M3 20mm screw along with 2 x M3 square nuts to clamp to the clip part of the webcam behind the main camera.

  • Use 1 x M3 20mm screw secured with 1 x M3 nylon locknut to attach the flip down cover. Tighten the locknut to the point in which adjusting the flap position has enough resistance to not be loosely flapping around, but still can be moved with ease. 

 

 

Tags