1 / 3
Vented case for Raspberry Pie 4 (or its BTT clone with CB1/CM4 with heatsink) and SSD
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case allows efficient passive cooling of Raspberry Pie 4 (or it's BigTreeTech clone) with heatsink and 2.5" SSD.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 1
- Views
- 506
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
BOM
- 2.5 mm bolts
- 16mm x 4
- 6mm x 2
- 2.5mm nuts (x2) are optional
- 10 or 11 mm rubber feet x 4 (optional)
Assembly:
- print 3 parts
- mount heatsink onto CB1/CM4, and then CB1/CM4 onto Pi adapter
- mount Pi adapter w / heatsink into the mid part using 6 mm bolts
- assemble all 3 parts using 16mm bolts tucked through the corner pillars from the bottom up, push first and screw for final 4 mm. Bolts should be fully screwed in so that SSD cradle is fully accessible.
- attach rubber feet
- slide 2.5" SSD into the bottom tray until it clicks into proper position
usb-to-sata adapter can be used to drive SSD