1 / 3
Festool Domino XL DF700 plunge depth limit stops — image 1
1 / 3

Festool Domino XL DF700 plunge depth limit stops

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Clips on the side bar to limit plunge depth.

Rating
0 / 5
Likes
15
Downloads
83
Makes
0
Views
648
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Public Domain

DF700 Real bit length 90mm

Domino bar space 77.25mm
Domino bar thickness 22mm diameter

Notes:
DF700 Real bit length 90mm

4mm bit length 79.25mm (10.65mm shorter than the rest)
Base shim to zero depth 62.00mm
For 1/2" plunge, bit needs to extend to 9.25mm   Shim=52.75mm
For 5/8" plunge, bit needs to extend to 11.0mm   Shim=51.00mm
For 3/4" plunge, bit needs to extend to 15.0mm   Shim=47.00mm

5mm and up length 89.90mm:
Base shim to zero depth 72.5mm
For 1/2" plunge, bit needs to extend to 9.25mm   Shim=63.25mm
For 5/8" plunge, bit needs to extend to 11.0mm   Shim=61.5mm
For 3/4" plunge, bit needs to extend to 15.0mm   Shim=57.50mm

For use with the Seneca small bit adapter for your Festool Domino DF700.
When plunging down in the face of plywood the larger Domino goes too deep and will go through the thickness of the plywood.   The smallest plunge depth setting isn't enough to limit the depth of cut.
Snap these stops on the larger plunge bar on your Festool Domino DF700.

Since the 4mm festool bit it shorter than the rest 5mm and up I've made two different sets.   Use the 4mm for 1/2", 5/8" and 3/4" plywood and the 5mm+ sets for the other bits for each plywood type.

I've set my depths to stop a full ply thickness of plywood that I use in my shop.

Print Settings
Printer brand:
Creality

Printer:
Ender 3

Rafts:
No
Supports:
No
Resolution:
Standard
Infill:
30%

Tags