Festool Quick Clamp Pad 1.5" Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 1.5" replacement extension pad for the Festool Quick Clamp.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Festool Quick Clamp Pad 1.5" Extender
This is a replacement extension pad for the Festool Quick Clamp.
This will give the pad more height if you want to use it for holding down epoxy pours or reaching over the fence on a Kapex KSC 60.
The original one has a little flex in the material to bend and clip in place, the filament is more rigid so it will be a tight fit.
I would recommend firmly fitting the back end in and then clamp down using a board to snap in in place. Feel free to sand down one clip so make it a little smaller.
Print Settings
Rafts: No
Supports: Yes
Resolution: Standard
Infill: 30%