Tunnel Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tunnel Hueforge
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 58
- Makes
- 2
- Views
- 370
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Red Transmission Distance: 3.9
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Blue
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Orange
At layer #14 (1.2mm) swap to Yellow
At layer #18 (1.52mm) swap to Jade White for the rest.