drinking straw (thick) - usable as altitude z-axis test
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.55 – €0.67 net (excluding VAT)
For file: Strohhalm-Tube_202405_0.4n_0.1mm_PETG_MK4IS_53m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.61 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 53.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Create your PETG drinking straw, a thick one. You can use this as altitude z-axis test.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 108
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation and nutrition!
| Settings | Value |
|---|---|
| Infill | 15% |
| Perimeters | 3 |
| Layer Height | 0.1 mm (first 0.2mm) |
| Material | PETG |
| Supporting Material | all |
| Comments | printed on MK4 with FW6.0.0 |
Feedback is welcome.
Share your makes!