VORON BTT Smart Filament Sensor SFS 2.0 Mount for 2.4R1 Exhaust
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VORON BTT Smart Filament Sensor SFS 2.0 Mount for 2.4R1 Exhaust
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 45
- Makes
- 0
- Views
- 864
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I still have the Voron 2.4R1, but I am running low on my accent colour. It is easier to print the main colour of black.
Modified the file to support the single hole design for the exhaust housing from the 2.4R1 design.
Also added a slot to have the cable come out the side of the housing.
This was printed in PLA Black 4 walls, 5 top/bottom, 40% infill. I went 0.3mm layer height.
**Please note that a M3x4x5 heat insert is used to hold the cover. The rest are the default Voron heat inserts which are 6mm long.
Make sure to check out the original work here for the 2.4R2 design: