VORON BTT Smart Filament Sensor SFS 2.0 Mount for 2.4R1 Exhaust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VORON BTT Smart Filament Sensor SFS 2.0 Mount for 2.4R1 Exhaust
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 864
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I still have the Voron 2.4R1, but I am running low on my accent colour. It is easier to print the main colour of black.
Modified the file to support the single hole design for the exhaust housing from the 2.4R1 design.
Also added a slot to have the cable come out the side of the housing.
This was printed in PLA Black 4 walls, 5 top/bottom, 40% infill. I went 0.3mm layer height.
**Please note that a M3x4x5 heat insert is used to hold the cover. The rest are the default Voron heat inserts which are 6mm long.
Make sure to check out the original work here for the 2.4R2 design: