1 / 1
Stand for 3D SETS Sakura 240 - Model 17 — image 1

Stand for 3D SETS Sakura 240 - Model 17

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This support allows you to avoid having your tires flattened when your Sakura 240 remains unused for too long time.

Rating
5 / 5
Likes
23
Downloads
130
Makes
4
Views
537
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Warning

None.

Definition

None.

Printing

Is required the same printer size than 3D SETS has defined.

Infill 15% and layer 0.15mm is fine.

Build

  • 4pcs. M3 x 6-15mm for top and middle part 
  • 1pcs. M3 x 6-15mm for middle and bottom part

Use the holes for the top/middle screws according to the weight distribution of your Sakura.

Feedback

It is welcome.

Remark

This modeling was carried out to meet a need of a 3D SETS Sakura 240 owner who validated this design. Big thanks to him.
Not owning the 3D SETS license for the Sakura 240, if upgrades were to be required, it will be difficult for me to do them without testing by a third party.

Version

v1/v20240505 1st upload.

Tags