1 / 1
Microscope RMS DIN nose and objective caps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here are the .stl for microscope caps. One is for the nosepiece, the other for the objectives. They fit RMS thread,…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 60
- Makes
- 1
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here are the .stl for microscope caps.
One is for the nosepiece, the other for the objectives.
They fit RMS thread, 0,800 inch, 36 TPI.
The tread is designed quite loose, it should work with PLA or other plastics.
Print Settings
Rafts:
No
Supports:
No
0,10 - 0,15
Notes:
Just make it a bit accurate, or the fine thread won't work properly.
If you put the model with the flat face down, it will need no rafts or supports.Category: Parts