MINI 3D-Printed RC CAR by El1as.F
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D Printed small RC car with all-wheel drive and suspensions
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 247
- Makes
- 0
- Views
- 3,780
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts.
If you want to learn more about it, I also made a YouTube video: https://www.youtube.com/watch?v=RjJTNpy3MkQ
(Yes the video is in German, but I made subtitles for English and French people)
I also made a Building Video: https://www.youtube.com/watch?v=9Ftb_rpbNsk
Needed is:
- Brushless motor 2212 920kv outrunner
- Brushless motor controller 35 amps for RC cars
- Receiver
- Battery
- 9G Micro Servo Motor
- Ball bearing 10 × 15 × 4 mm
- 4x Spring suspension 15 × 10 (diameter) mm
-Screws: + 7x M3 15 mm (To secure the main body parts) + 2x M3 10 mm (To secure the main body parts) + 5x M2 5 mm (for the direction and the motor gear) + 4x M3 20 mm (To secure the wheels)
- Some PLA and time to build it
- Rasp and sandpaper
- GREASE FOR THE GEARS AND CARDAN SHAFTS!!
Parts that I use: https://bit.ly/3o1sv1n
If I forgot something, please let me know!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: Esun PLA+ PLA and TPU
Notes:
You need to print the parts with a 0.3 mm nozzle and a 0.15 mm layer high.
The print orientation can be taken from the pictures.
The drive shaft and the tires should be printed with TPU or a flexible Filament.