MINI 3D-Printed RC CAR by El1as.F
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Printed small RC car with all-wheel drive and suspensions
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 247
- Wydruki
- 0
- Wyświetlenia
- 3780
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Before I started designing, I had set myself the following goals. It should be as small as possible, but still have all-wheel drive and have suspensions. Of course, it also has to consist largely of 3D-printed parts.
If you want to learn more about it, I also made a YouTube video: https://www.youtube.com/watch?v=RjJTNpy3MkQ
(Yes the video is in German, but I made subtitles for English and French people)
I also made a Building Video: https://www.youtube.com/watch?v=9Ftb_rpbNsk
Needed is:
- Brushless motor 2212 920kv outrunner
- Brushless motor controller 35 amps for RC cars
- Receiver
- Battery
- 9G Micro Servo Motor
- Ball bearing 10 × 15 × 4 mm
- 4x Spring suspension 15 × 10 (diameter) mm
-Screws: + 7x M3 15 mm (To secure the main body parts) + 2x M3 10 mm (To secure the main body parts) + 5x M2 5 mm (for the direction and the motor gear) + 4x M3 20 mm (To secure the wheels)
- Some PLA and time to build it
- Rasp and sandpaper
- GREASE FOR THE GEARS AND CARDAN SHAFTS!!
Parts that I use: https://bit.ly/3o1sv1n
If I forgot something, please let me know!
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
20%
Filament: Esun PLA+ PLA and TPU
Notes:
You need to print the parts with a 0.3 mm nozzle and a 0.15 mm layer high.
The print orientation can be taken from the pictures.
The drive shaft and the tires should be printed with TPU or a flexible Filament.