1 / 3
Ryobi accessory holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Accessory holder for Ryobi RSV18X.. stick vacuum cleaner
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 100
- Makes
- 0
- Views
- 989
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our vacuum cleaner was delivered without an accessory holder, so I decided to make one myself.
The holder must be able to bend a little during assembly, so be sure to print with a suitable filament, such as PETG.
Apply a thin layer of glue between the printed parts before tightening the two thread forming screws to prevent the parts from rotating.
Additional parts required:
- 1 x M3 nut
- 1 x M3 x 12 mm socket head cap screw
- 2 x 4.2 x 12 mm thread forming screws. Head dia 7.4 mm. Or adjust the model according to the screws you have
Use supports where the screw and nut enter the model.