The Missing Minimal Vision Pro Case with AirTag support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact and safe Vision Pro protection when combined with the Apple front cover. Easily fits in backpack.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 129
- Makes
- 0
- Views
- 1,076
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to be able to carry my Vision Pro in a camera compartment of my Peak Design Everyday Backpack. I felt that any of the Vision Pro cases were too bulky when I already had protection from my backpack. All that was missing was a solution to cover the lenses of the Vision Pro while also using the Apple front cover for the front screen protection.
Since the Vision Pro lacks “Find My” support, I also integrated an AirTag slot.
All you need after printing this file is a 2" wide and 12" long velcro strap to wrap around and keep the Minimal Case in place together with the Front Cap. I'm using a stretchable Wrap-It strap.
NOTE: this was designed for my 21W light seal, I have tried it on a few other ones and it seems to work, though it might not be as much of a prefect fit.
Printing instructions:
- strong PLA (I use Atomic Filament Marble)
- 0.1mm layer height
- 0.2mm initial layer height
- 3 wall loops
- 15% rectilinear infill
- on Bambulab P1P I reduced the overall printing speed by half to get a nicer finish
- optional build plate only support if you think it's necessary