MK3 Spring Feet (optimized to prevent lateral vibrations / motion)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was looking for some MK3 feet which also prevent lateral vibrations / motion. This is my own creation.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 95
- Makes
- 1
- Views
- 1,022
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Printing Instructions:
Material: PLA
Nozzle: 0.4
Infill: None
Perimeter: 6
Top and Bottom Shell: 0
Leyer Height: As you wish, I recommend 0.3
Make sure to keep the perimeter to the point where you have the little gab as shown in the pictures. It's probably not entirely necessary but from my comparison (listening to the noise) it helped to reduce the transport of the vibrations even more.
If you want to modify the creator file here is the fusion link: https://a360.co/32beZ43
For everyone who has the MMU addon or other stuff that makes the printer heavier just increase the width of the feet inside your slicer or download the maker file and increase the opening angle.