Control terminal for PRUSA/IKEA Lack Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made my own control terminal to quick control my printer, fans and light in my printer enclosure
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 45
- Makes
- 0
- Views
- 1,119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made my own control terminal to quick control my printer, fans and light in my printer enclosure
I made control box with six places for standard rocker switches or push-buttons
It is modeled to montage under the IKEA Lack
You have to montage the rear piece (with two holes for cables) and next only slide the front piece on place
In my case I control:
| Main power | MINI+ power | Power supply Fans | Enclosure Fan | LED Light Switch | LED Light Push Button |
Main power => contractor of main power
MINI+ power => control of 3D printer
Power supply Fans => fans in my power supply box under the lack (contractor, supply for both thermostats and for LED light) = controled with single thermostat
https://www.prusaprinters.org/cs/prints/48900-adapter-for-30x30x10-cooling-fans
Enclosure Fan => fan in top of my enclosure = controled with single thermostat
LED Light Switch & Button => both have the same function - control the light
Download -> Share -> Print -> Rate -> Donate -> Enjoy -> Thank you
Created for printing without supports
Print instructions
Model is created for PRUSA/IKEA lack enclosure
.gcode is created for PRUSA Mini/Mini+
I sliced it with a brim. But you can re-slice it
| NO supports are required |