Dragon Burner v8 Hot-end Mounts for Two Trees Sapphire Pro Linear Rail Carriage

Mounting parts including a customized Bowden top piece to enable mounting of the Dragon Burner v8 hot-end (by Chirpy) on a Two Trees Sapphire Pro printer. The top piece requires 5x standard Voron M3 heat set threaded inserts (2 in the front, 3 in the back) for the mounting screws holding it onto the metal carriage. The top half of the rear mount requires 2x standard Voron M3 heat set threaded inserts in the holes which join it to the lower brace part, plus 2x M3 hex nuts inserted into slots in the sides for the bolts which go through the entire hot-end. M3x10mm screws are used to join the brace to the rear mounting top part. The X-end stop switch mounts onto the top rear part, secured with 2x M2 screws which need to cut threads into the plastic to stay in place, as they cannot protrude through the front of the microswitch. STEP files provided for ease of modification if you want to customize further. The Bowden Mount and the Carriage Mount parts require supports for printing to support the flat overhanging areas. The brace can be printed without support. None of the supported areas are visible in the final mounted part, so any rough faces from support removal can be filed down and the look of the mounted hot-end is not affected.