Hashi-Oki-Mugen / infinite chopstick bank (Spiral vase print)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.31 – €0.38 net (excluding VAT)
For file: hashi-oki-mugen3_0.3mm_PLA_MK3S_19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.35 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 19.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
My take on a chopstick bank (hashi-oki) - I really love spiral vase mode ;) Prints damn quick and is quite rigid.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 83
- Makes
- 5
- Views
- 681
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
My take on a chopstick bank (hashi-oki) - I really love spiral vase mode ;)
Prints damn quick and is quite rigid.
Printing instructions
This is not meant to be printed as a solid object!
- use regular draft print profile (0.3 layers)
- enable “Spiral vase” mode
- set line width to 1mm (yes, with your 0.4 nozzle)
- remove bottom layers
- remove skirt
Even though the thin walls, due to the narrower inner part the print will be very rigid anyways.
The pictured print even was done with reduced minimum layer time - the fastest I could get was around 12 minutes before cooling wasn't sufficient anymore.
Alternative printing instructions
If you dislike wide extrusions, you may also go for
- Standard quality profile
- 3-4 perimeters
- no top layers
- no bottom layers
- no infill
for 40-48min print time.
… Draft profile without any modifications would give you a solid object in 44min.