1 / 12
VzPrintHead TentaCool duct for Rapido&Euclid&CPAP
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small modification of MirageC and Vez3D Tentacool duct for my printer.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 58
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Credits: MirageC (https://github.com/MirageC79) and Vez3D ( https://github.com/VzBoT3D)
Note: STEP file of the Tentacool works in Onshape. It doesn't work in Fusion360, model is damaged (incompatibility?).
Tentacool source file link: https://cad.onshape.com/documents/522c85a5f8ca8fd8cdc3a4b3/w/a8a8225c4d48cc1632a86d2e/e/8c28082b4feac7e48f6a7243
Prepositions:
- VzBot printhead, V-core3 version.
- Rapido HF/UHF hotend.
- Euclid probe.
- CPAP cooling system
BOM:
- 2pcs M2x6 or M2x8 DIN7991 screws (for Euclid magnets)
- 2pcs M2x8 DIN912 screws or similar with flat head
- 2pcs M2.5x6 DIN912 screws or similar with flat head
- 2pcs M2.2 Lug Terminal (for example https://www.aliexpress.com/item/1005004859956768.html?spm=a2g0o.order_list.order_list_main.101.623d1802ZfWXnr)
- 2pcs brass heat inserts M2x3x3.5
- 2pcs brass heat inserts M2.5x4x4
- 2pcs brass heat inserts M3x4.2x4
- 2pcs Aluminum spacer OD5 ID3, length up to you
- 2pcs M3 ISO7380, length up to aluminum spacer above
- some wiring
Print information:
I used Prusament PCCF, 0.4mm nozzle diameter and 0.2mm layer high. A few supports are necessary for proper Tentacool print. Look at attached pictures.