VzPrintHead TentaCool duct for Rapido&Euclid&CPAP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small modification of MirageC and Vez3D Tentacool duct for my printer.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Credits: MirageC (https://github.com/MirageC79) and Vez3D ( https://github.com/VzBoT3D)
Note: STEP file of the Tentacool works in Onshape. It doesn't work in Fusion360, model is damaged (incompatibility?).
Tentacool source file link: https://cad.onshape.com/documents/522c85a5f8ca8fd8cdc3a4b3/w/a8a8225c4d48cc1632a86d2e/e/8c28082b4feac7e48f6a7243
Prepositions:
- VzBot printhead, V-core3 version.
- Rapido HF/UHF hotend.
- Euclid probe.
- CPAP cooling system
BOM:
- 2pcs M2x6 or M2x8 DIN7991 screws (for Euclid magnets)
- 2pcs M2x8 DIN912 screws or similar with flat head
- 2pcs M2.5x6 DIN912 screws or similar with flat head
- 2pcs M2.2 Lug Terminal (for example https://www.aliexpress.com/item/1005004859956768.html?spm=a2g0o.order_list.order_list_main.101.623d1802ZfWXnr)
- 2pcs brass heat inserts M2x3x3.5
- 2pcs brass heat inserts M2.5x4x4
- 2pcs brass heat inserts M3x4.2x4
- 2pcs Aluminum spacer OD5 ID3, length up to you
- 2pcs M3 ISO7380, length up to aluminum spacer above
- some wiring
Print information:
I used Prusament PCCF, 0.4mm nozzle diameter and 0.2mm layer high. A few supports are necessary for proper Tentacool print. Look at attached pictures.