Bedside nightstand button console for controlling smart home things
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a console that attaches to the nightstand so you can control up to 5 smart things from bed.
- Rating
- 0 / 5
- Likes
- 37
- Downloads
- 35
- Makes
- 0
- Views
- 1,198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
A nightstand button console for controlling lights and other devices without leaving bed. It's controlled using your garden-variety Wemos D1 Mini (clone) flashed with Tasmota for ease of configuration (I'm using these GPIO: 4, 5, 12, 13, 14). I assume ESPHome would also work. This console sends out an MQTT command which is picked up by my Node Red server.
The buttons I purchased from AliExpress (they're not exactly cheap when you include shipping). The button holes in the face of the unit are 12.25mm. I also used JST-XH 2.54mm connectors so I could easily disassemble the project (that link is for reference only, that set appears to only have 10cm leads which would not be long enough for this project). I have these attached to a standard 60mmx40mm prototyping PCB board.
This was designed as an under-counter attachment. There are holes that you can fit a screwdriver through in order to secure it to the bottom of a counter or desk (or nightstand in my case) with screws.