Wacom Cintiq Pro 13 / Ipad / Tablet desktop stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for the Wacom Cintiq Pro 13, but this works well also as an ipad / tablet stand
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 593
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi !
I looked around at different stands for ipads to remix for my Wacom Pro 13, but wanted something a bit more sturdy. So I came up with this bad boy
After printing the stand at 5 degrees lean back, it turned out to be not quite enough for the viewing angle and for the wacom's centre of gravity. So I made some chocks to add to my print that makes the stand 10 degrees lean (I didn't want my print to go to waste). I made a version that is 10 degrees of lean for others to print.
The stand prints as 3 main pieces, the two legs, and middle section. They all clip together firmly.
If you want to make the stand a different size, you can resize all the parts in your slicer, or just change the width of the middle section's model to make it narrower - just make sure if you do this that you don't change the sizes of the clips, as they fit perfectly as they are.
TIP: I print with “exclusive” settings on Cura to make sure the parts that clip together are dimensionally accurate
Happy printing !