Filament Clip - 1.75mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.34 – €0.42 net (excluding VAT)
For file: 1.4m_25m_MK3S_Filament Clip Ver02 R03 - with pads.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.38 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 24.6 min
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Printed spring clip for keeping the end of filament from tangling.
- Rating
- 4 / 5
- Likes
- 23
- Downloads
- 130
- Makes
- 2
- Views
- 795
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Single piece spring loaded Filament Clamp
I store several spools of filament in a dry cabinet and they end up being tight against each other. Because of this, using the holes in the side of the spools to hold the filament end often resulted in the end breaking off and the spool getting tangled anyhow.
This was my solution, a filament clip that you press the end of the filament into the side by friction and a spring clamp to grip the roll on the next wrap. Once in place the clamp can be slid along the filament to snug up the roll.
I've printed them ABS so far, but expect other materials would work too. The first ones were printed over 2 years ago and I've not had the spring fail on any of them yet.
Designed for 1.75mm Filament.
Print Info:
- Material - ABS
- Layer - 0.2mm
- Infill - 50%
STL with and without hold down pads are provided. Simply print, remove hold down pad material if necessary, and snap (press) the hinge together.