1 / 1
Magnet applicator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds two 3x6mm magnets, one in each end, for easy orientation/installation of other magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 24
- Makes
- 0
- Views
- 526
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
A simple magnet applicator. There's a cavity at each end that fits a 3x6mm magnet, with comfortable clearance.
Intended as a two-color print. I started with red, paused at top of first cavity and inserted magnet North side down, paused halfway up height and swapped to blue filament, then paused at top of second cavity, inserted second magnet South side up, then resumed print to seal it in.
Recommend using a brim - tried it without and it came off the plate when I put the second magnet in.