IKEA DRAKTFRUKT Semi-hydro Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Semi-hydro base insert for 13cm IKEA DRAKFRUKT
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
Semi-hydro base insert for 13cm IKEA DRAKFRUKT.
No provision for fill pipes or water level indicators; swirl the pot gently and feel or listen for the water level.
Available in a design that has a holder for a standard 5-6mm square chopstick that I use to hold a moss pole up.
Should be thin enough that infill doesn't matter, but if printing with sub-0.2mm layer heights, print with 100% infill to ensure no air gaps (to avoid harboring bacteria).
Suitable for both the taller and shorter pot, but I only use it with the shorter pot, as the taller pot has a raised dome on the base that prevents the LECA from touching the lower part of the water reservoir.