1 / 3
IKEA LACK Enclosure PSU Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model was designed to allow the attachment of a black Prusa Mk4 PSU to a leg of an IKEA LACK table.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 38
- Makes
- 0
- Views
- 280
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I made an enclosure for my Prusa Mk4 printer, I needed something to hold the PSU. So, I came up with an adapter that I attached to one of the table legs. The adapter is modular, so you can choose where to attach it. Also, it does not depent on how far the screw points of the PSU are apart.
This adapter is needed two times for proper attachment of the PSU.
What you need:
2x 3,5 mm screws (to connect the PSU to the adapter)
4x 4 mm screws (to connect the adapter to the table leg)