Flite Test Sea Duck Compatible Magnetic Canopy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Flite Test Sea Duck is one of my favorite planes but I find the opening in the top rather small and inconvenient.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 33
- Makes
- 0
- Views
- 305
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
The Flite Test Sea Duck is one of my favorite planes but I find the opening in the top rather small and inconvenient. This requires a slight alteration to the plans. I basically hack off the front of the foam board canopy and put this in it's place during the build. Allows for much better access to the electronics. It does however make it slightly less waterproof but It should be fine as long as you land right side up :).
Things to be aware of
This was designed off of a 95% model. You may need to adjust the size in the slicer based on your model.
Magnets as designed at 10x5x3 rare earth magnets (Neodymium). There are 3 per side and it is hard to get off. You could probably easily do with maybe 2 per side.