1 / 2
Qidi X-smart 3 Fan and filter upgrade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upgrades the fan on a qidi X-smart 3 to a blower style and vents out the rear to a cylinder air filter.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 23
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need a few various m4/5 screws. I used 2x M4x45 and a m4 12mm coupler to secure the base cap and lid together. 2 M5x30-35 for the fan and bracket. I used the Original screws and nuts to mount the adapter and duct.
Fans: https://www.amazon.com/gp/product/B07611PJ27
Filter: https://www.amazon.com/gp/product/B09W8GHPLS