1 / 4
MK4/XL nextruder nozzle adapter for 6.3mm 1/4'' Torque Adapter/Wrench
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
- for nextruder, Prusa recommends: “The specified torque value is 1.5 Nm (13.3 lb-in). The use of a torque wrench is recommended”

- for nextruder nozzle retainer screw is 0.2--0.3 Nm (source):


- for E3D v6 block, Prusa recommends: “tighten the nozzle with a force of 2.5 Nm (Newton Meter”
I use a cheap Wisretec BDA2-030 torque adapter, that has a 0.3 - 30 Nm range.
Also you can use the 1.5 Nm rotor from Prusa XL - Nextruder Torque model:

