1 / 8
Sanding block vacuum connected (150mm)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sanding block that you can plug to a vacuum cleaner.
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 271
- Makes
- 1
- Views
- 2,203
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A sanding block that you can plug to a vacuum cleaner.
You need to buy a Mirka interface pad (150 mm), its about 20€ for 2.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
Yes
Resolution:
0.28
Infill:
25%
Filament: PolyTerra PLA Savana Yellow
Notes:
Use support only on under the hose connector, the rest is self supporting. Look at the Cura screenshot I posted for more details.
- I shaped the interface using a old solder iron, it easer for making those sharp angles.
- Glue the pad interface with superglue.
- I also added the lock with a m2.5 insert and a screw, but it's not mandatory.
Category: Hand Tools