1 / 8
Charger for Sony NP-BG1 camera batteries
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple charger using a TP4056 charger board and pogo pins to charge a Sony NP-BG1 digital camera battery
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 92
- Makes
- 1
- Views
- 617
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
Needed parts
- 4x M2x5mm screws with low head (<2mm)
- 2x pogo pins ~4mm total height (Aliexpress link)
- 1x TP4056 charger board with USB-C connector (Aliexpress link)
Assembly
- Using a Dremel tool, enlarge the B- and OUT+ contact holes on the TP4056 PCB until the pogo pins fit. (If you have shorter pins, you can skip this step and solder them directly on the other side of the board)
- Solder the pogo pins on B- and OUT+ pads so that they stick out of the bottom side of the board (refer to pictures)
- Assemble the enclosure with M2 screws (make sure the heads don't protrude in the battery compartment, preventing the battery from reaching the pogo pins)