16mm Adapter - Rollers for (Un)original Prusa Drybox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapts the roller wall for 'Rollers for (Un)original Prusa Drybox' to fit a 16mm pipe instead of the 18mm pipe.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 18
- Makes
- 0
- Views
- 205
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
When I made the dry box, i had some 16mm pipe laying around so i used it instead.
I then printed all of these rollers, forgetting that the pipe I used was 16mm not 18mm. So I printed these adapters that can be inserted into the ‘roller wall’ piece so that it fits snugly on 16mm pipe.
Ive not included the original files 'roller_wall' and ‘bearing_extension’ because i did not design them. Please download them from the link below, and give Chris1985 the appreciation he deserves for the design.
I printed in PLA, with 0.2mm layer heights.
Use a small dap of superglue to adhere the adapter to the roller wall.