16mm Adapter - Rollers for (Un)original Prusa Drybox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts the roller wall for 'Rollers for (Un)original Prusa Drybox' to fit a 16mm pipe instead of the 18mm pipe.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
When I made the dry box, i had some 16mm pipe laying around so i used it instead.
I then printed all of these rollers, forgetting that the pipe I used was 16mm not 18mm. So I printed these adapters that can be inserted into the ‘roller wall’ piece so that it fits snugly on 16mm pipe.
Ive not included the original files 'roller_wall' and ‘bearing_extension’ because i did not design them. Please download them from the link below, and give Chris1985 the appreciation he deserves for the design.
I printed in PLA, with 0.2mm layer heights.
Use a small dap of superglue to adhere the adapter to the roller wall.