1 / 2
Vertical dryer on a broomstick (SCUBA diving equipment and more) — image 1
1 / 2

Vertical dryer on a broomstick (SCUBA diving equipment and more)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Originally for drying diving equipment and specifically diving booties, but ended up for many other things.

Rating
0 / 5
Likes
5
Downloads
23
Makes
0
Views
462
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

I started creating it because drying diving booties is more efficient when they are hanging upside down, but ended up creating a whole vertical rack for all the small diving equipment. And once it was done, it turned out useful for drying just about anything - shoes, boxing gloves and what not (will soon update with usage pics). So sharing.

Inspired by https://www.thingiverse.com/thing:4926201, but the original didn't fit my needs and I had no piping available, so decided to create my own.

The whole thing consists of a few types of hangers mounted on a standard metal-plastic broomstick with diameter of ~22mm, and fits tight. Screw the parts in place with self-drilling screws after positioning, the holes are already marked.

The hangers types:

  • Booties - consists of 2 parts, the base and the legs, to reach the necessary width and distance from the broomstick. Meant for hanging the booties nose-up, similar to ski/snowboard boots.
  • Short generic - 6 vertical poles of ~10cm length for hanging anything that fits.
  • Long generic - 6 vertical poles of ~18cm length for hanging light stuff like diving gloves, hoods etc. Please note that these are high and slower speeds / Z-hop might be needed, depending on your printer.

Print Settings

  • Rafts: No
  • Supports: No
  • Resolution: 0.2
  • Infill: 15% and up
  • Filament material: Anything should work, I used PLA
  • Notes: For all parts except generic_long, 15% probably should be enough on a well tuned printer. For generic_long, more infill might be useful.


 

Tags