Segway i108E Spikes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spikes for the Segway i-series mower. Printed in two parts to fit a Prusa MK3 or similar.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 155
- Makes
- 0
- Views
- 1,084
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Printed in a single part on a big printer, or in two parts to fit the build area on a Prusa MK3. Attach the spikes with screws into the orignal wheels to improve the climbing performance on grass with the mower.
You need to do some adjustments to the docking area. The spikes are slippery on the docking surface, so you need some soft rubber that is a bit sticky for it to move in place and you also need to raise the back of the mower approx 3 cm in the back with a rubber mat or similar to get the mower to fit in the station.
The flat side should be facing out.
I printed in PETG with a 0.6 nozzle and 0.3 mm layer height. 4 perimeters.