Infexion Quick Release Ring Handle for 4mm Depower Rope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle to assist with inserting 5mm ring into Infexion Quick Release
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 1
- Views
- 351
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Infexion makes a novel seat belt style quick release for kitesurfing. The quick release accepts 5mm rings into the jaws. If you are using an Infexion bar with thin depower lines, you can use the stock line organizer. I am attaching the ring to my control bar with a 4mm depower rope, which is too thick for the stock line organizer.
If you try to insert the ring into the quick release with your hands, the ring tends to rotate, making it difficult to insert.
This handle slides over your depower rope, and has enough clearance to fit the 4mm dyneema lark's head inside. Remove the ring, slide the handle over, reattach the ring. It makes inserting the ring much easier now.
I printed in TPU for impact and water resistance, but it should be fine with other filaments as well. With a .4mm nozzle and .2mm layer height, I opted for 4 walls, 5 tops and bottoms, and 22% gyroid infill.