Cartographer/Beacon Mount for Stealthburner -Fast Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I wanted a mount that didn't require printing the X carriage again. I found one online but it didn't fit so I made one.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 79
- Makes
- 0
- Views
- 762
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
I wanted to create a mount that would fit with the standard x-carriage mount on the Voron. I didn't want to have to print extra parts unnecessarily.
The spacing on the mount for the holes mounting to the x-carriage is 9mm.
I have also included the 9mm part from the Voron parts in case you need it.
At the moment I have the CANBUS cables running through the back of the X extrusion to the EBB36 but they could be routed through the front however I will need longer cables than the ones provided with the kit.
You can see it here running perfectly fine: