Cartographer/Beacon Mount for Stealthburner -Fast Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a mount that didn't require printing the X carriage again. I found one online but it didn't fit so I made one.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 761
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to create a mount that would fit with the standard x-carriage mount on the Voron. I didn't want to have to print extra parts unnecessarily.
The spacing on the mount for the holes mounting to the x-carriage is 9mm.
I have also included the 9mm part from the Voron parts in case you need it.
At the moment I have the CANBUS cables running through the back of the X extrusion to the EBB36 but they could be routed through the front however I will need longer cables than the ones provided with the kit.
You can see it here running perfectly fine: