Complete Rosary Parts (beads, center piece, and cross)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rosary beads, cross, and center piece
- Rating
- 0 / 5
- Likes
- 67
- Downloads
- 515
- Makes
- 0
- Views
- 2,480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
I made this complete set of beads, a center piece, and a cross (actually Aleks89's design https://www.printables.com/model/434642-orthodox-cross-keychain). I used both PLA+ (black) and PETG (clear) and they both came out very strong at the settings below.
Print settings:
.2mm layer height
15% infill
no support AND NO BRIMS (brims make beads look ugly)
I recommend printing at a moderate speed. I slowed my Bambu Lab A1 settings down by 50% to ensure that the beads stayed in place with no brims and that the walls were high quality. This print should still only take about 2 hours with those settings.
If possible use a scarf joint seam to improve the look of the beads. I used stock Bambu Studio scarf seam settings.
The .3mf file has 60 Hail Mary beads and 10 Our Father beads just incase any come out ugly.
I used #36 rosary twine off of Amazon which has a diameter of 1.3mm. The beads have a diameter of 1.5mm so they have plenty of room. Here is a link to where you can find it.
Happy printing!
