1 / 7
Calibration cube shape with hole - multiple measuring point
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Calibration cube shape with multiple measuring point: outer dimension, inner dimensions, skewness, hole diameter...
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 29
- Makes
- 0
- Views
- 117
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
Calibration cube shape with multiple measuring point: outer dimension, inner dimensions, skewness, hole diameter, part height, wall width, elephant foot...
For measuring location see attached pictures.
Main dimensions:
- hole diameter: 20 mm
- cube inner dimensions: 30x30 mm
- cube outer dimensions: 35x35 mm
- part height: 15 mm
* inner and outer dimensions are used to compensate for over/under extrusion.
Calibration examples:
- use cube dimensions and hole diameter for horizontal expansion parameter,
- for skewness compare the diagonal dimensions,
- for elephant foot use difference between measurment on top and bottom of the print.