Wall mount for PickAxe with STEP file included
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for pickaxe.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 53
- Makes
- 0
- Views
- 219
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I made this wall mount for a pickaxe. It is very rudimentary, but it works fine for my use. The pickaxe is a medium weight I guess. IIRC the neck is about 65mm wide and around 40mm deep.
You need quite long screws to mount (I used 90mm long, but 80 should work). That is because I wanted the screw head to be at the depth of the pickaxe, du to the weight of it. The center screw can be shorter.
I included the STEP-file in case you want to modify it.
Lots of walls and infill to make it strong. I printed mine in PLA, but PETG might be a better material since PLA can sag over time.
Edit: A little tip: If you are unsure if it fits your pickaxe, Print a test version with 2 walls 8% lightning infill. 0.32 mm layer height. It uses very little filament, and it prints fast. That way you can test fit, and do changes to the STEP file if needed, before printing it beefy and strong. (This is how I usually test when making prototypes)