Towel Rail Bracket 30 x 15 Oval Bracket Airing Cupboard Rail Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I designed these holders to replace an old tired over the door towel rail for in my airing cupboard.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Towel Rail Bracket 30 x 15 Oval Bracket Airing Cupboard Rail Holder
I designed these holders to replace an old tired over the door towel rail for in my airing cupboard.
I used PLA+ printed with 0.2 layer height, 4 perimeters with 20% infil on my Ender 3.
Towel Rail is a 30x15mm oval clothes rail cut to size to suit from Screwfix
I designed the piece with a 0.1-0.2mm tolerance. The rail needs pushing/knocking into the bracket with a hammer and piece of wood to protect the rail/bracket.
4mm screws, length to suit requirement. I tried to recess the flat of where the screw are to make them more flush/hidden. due to the thickness i did not countersink the design.
LH and RH models uploaded - these are just mirrored exports.
Not for comerical use