Towel Rail Bracket 30 x 15 Oval Bracket Airing Cupboard Rail Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed these holders to replace an old tired over the door towel rail for in my airing cupboard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Towel Rail Bracket 30 x 15 Oval Bracket Airing Cupboard Rail Holder
I designed these holders to replace an old tired over the door towel rail for in my airing cupboard.
I used PLA+ printed with 0.2 layer height, 4 perimeters with 20% infil on my Ender 3.
Towel Rail is a 30x15mm oval clothes rail cut to size to suit from Screwfix
I designed the piece with a 0.1-0.2mm tolerance. The rail needs pushing/knocking into the bracket with a hammer and piece of wood to protect the rail/bracket.
4mm screws, length to suit requirement. I tried to recess the flat of where the screw are to make them more flush/hidden. due to the thickness i did not countersink the design.
LH and RH models uploaded - these are just mirrored exports.
Not for comerical use