Nautilus -NOZZLE BUNKER-

UPDATE 2024/10/12

Limited version is now free at MakerWorld
 https://makerworld.com/models/697227

UPDATE 2022/03/12 Add holder Rev04!!

UPDATE 2022/04/19 Removed STEP file/ Add limited version URL

https://cults3d.com/en/3d-model/tool/nautilus-nozzle-bunker-limited-edition

UPDATE 2023/05/19 Added Dropeffect XG nozzle version/updated thumbnail

https://s.click.aliexpress.com/e/_DFklBkN

-----------------------------------------------------------

Print Settings

Latch: Use support. 0.2mm layer height.
Holder: No support needed. Print with 0.2mm layer height. After I received feedback that clearance is not enough, I revised to 03. Base diameter has 0.5mm clearance. Print with 100% cooling fan.
Cover: No support needed. Use 0.2mm layer height

Wall: Please adjust to 3 or more for everything.

BOM

Use M3 socket head cap screws laying around your desk :)

Thoughts

What I'm planning to update is add some sort of thumb grip to make it easier to remove.
(It is already easy to remove I believe)
Feel free to post feedback! And don’t forget to post your make!…and follow/like!

I really appreciate if you give me a tip!

STEP file can be share but you need to follow rules below

1. Post remix as remix of this model.
2. Share with same license. Do not violate my license.
   Creative Commons attribution Non commercial Share alike

If you agree then contact me via Instagram or Twitter.

https://www.thingiverse.com/thing:5090482

I use affiliate links which motivate my work and it will not harm you as well. Win-Win!