Daewoo 4L Air Fryer Knob Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement knob that I made for my Daewoo 4L air fryer. This took me around 20 minutes on my AnkerMake M5C.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 44
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement timer knob for my Daewoo 4L air fryer that I made after the original one broke. This is a quick print, taking only around 20 minutes on my AnkerMake M5C. It is quite a tight fit, so feel free to scale it up by 5% if your printer doesn't have good tolerances.
Print Instructions:
- Make sure you print this in a heat resistant material, such as PETG. I originally printed this in PLA but it warped due to the heat and didn't work.
- I recommend 30% Gyroid infill because this part needs to be strong.
- No supports or brim required.
I designed this using TinkerCAD because I couldn't find any replacement knobs for the same type of air fryer that I have. I have also posted this on Thingiverse, and Make It Real.
I hope you find this model useful and enjoy the print. Please post a make and leave a comment to let me know how it worked for you. As always, Happy Printing!!