RatRig V-Core 3.1 Funssor Super Lightweight CNC XY Joiner End Stops for Beta 1/2 Toolhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified X and Y Endstops if you run the Funssor super lightweight XY Joiners on your V-Core 3.1
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 86
- Makes
- 0
- Views
- 1,099
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is for those running the V-Core 3.1 beta 1 or 2 toolhead and the funssor CNC super lightweight XY joiners (see photo for the exact model - this is the lightest weight one they make). Running the stock end stops will result in your toolhead no longer being properly centered on the build plate, and these end stops are designed to recenter the toolhead on the build plate when homing.
X end stop is a full replacement for stock end stop and uses the stock m5x18 bolt.
The Y end stop consists of just two spacers to push the end stop 5mm further out. These spacers go behind the end stop switch and require you to remove the stock m3x8 bolts and replace them with m3x12mm.